Esden's Blog - pcb

Open-BLDC V0.1 Fully Assembled

Esden — Sat, 08 Aug 2009 00:00:00 +0000

I finished soldering Open-BLDC V0.1 boards and took some pictures while doing so.

After connecting it to the power everything seems to work properly and nothing is burning. That is really good news.

One little thing that is bothering me. The board draws 60mA, what is a value that I expected. The 5V linear regulator gets really warm. I am not sure if that will be a problem or not. But I did not find any other problems or screwups yet, even the big MOSFETs can be soldered using a simple soldering iron. It takes some time though, because the board and the MOSFETs are monstrous heatsinks.

More news coming up as soon as I start playing around with the software. [gallery]

Open-BLDC V0.1 is alive!

Esden — Fri, 07 Aug 2009 00:00:00 +0000

I assembled the basic STM32 circuitry of Open-BLDC and it works. I also made a video showing the logic board and blinking around. I know it is a bit pointless but I love blinking LED's! ;) I wrote the software using libopenstm32.

Have fun:

Video on Youtube and here the same video on Vimeo.

While assembling Uwe and I made some photographs that I don't want to hold off either.

[gallery]

Open-BLDC V0.1 boards are here

Esden — Wed, 05 Aug 2009 00:00:00 +0000

Good news everyone! The Open-BLDC boards are on my table. If you ask me they look gorgeous. :) But decide for yourself ...

Cheers Esden [gallery]

Open-BLDC SMD prototype and final prototypes

Esden — Mon, 29 Jun 2009 00:00:00 +0000

[caption id="attachment_252" align="alignright" width="150" caption="Open-BLDC SMD Prototype"][/caption]

It has been again a long time since the last post. (I have the feeling to repeat myself here)

There have been some news on the Open-BLDC front. I have been on Motodrone two weeks ago. Because I took the plane to get there I realized that it will be too difficult to take the breadboard prototype with me. So on a short notice I soldered together a smaller version using smd parts. As an extra feature this prototype includes Allegro hall based current sensors. These will enable us to investigate vector control (aka. field-oriented control).

At first it worked perfectly. Sadly after some tests I burned two of the three bridge drivers. I only had one spare to replace, so I could not work on the software for long. Today I got replacement bridge drivers. Now I should have enough spare ones to compensate for more burning. ;) So no news on the vector control front yet.

[caption id="attachment_255" align="alignright" width="150" caption="Open-BLDC Logic Board V0.1"][/caption]

[caption id="attachment_257" align="alignright" width="150" caption="Open-BLDC Powerstage V0.1"][/caption]

But I was not lazy while waiting for the replacement parts. I finalized the circuit and routed the logic board and powerstage. The powerstage was more or less straight forward but I am not very happy about the size and dimensions. I just am not sure if it is fittable on a standard Quadrocopter. Still it should be good enough as first etched prototype.

A much bigger challenge was the logic board. I somehow came up with this crazy idea to constrain the size of it to 45mm X 20mm. Still after many many hours of struggling with that puzzle I managed to squeeze all parts and wires into 45.5mm X 21mm! Yes you are right I am pretty proud of myself. I am still a routing beginner so the result seems to be good for me. :)

Now I have to wait so some other people review the work I did to try decreasing the amout of possible bugs in this boards. (If you like you can clone the repository here and check the stuff out, and give feedback on the mailinglist. (please subscribe before posting! :/ )) When I feel confident enough I will order some boards for testing and we can finally concentrate more on the software. :)